FOGRA39 is Europe’s standard profile for offset on coated paper. What it means, how it differs from FOGRA29, FOGRA51 and 300 %, and how to convert a PDF.
When a printer's file specification says "CMYK, FOGRA39", it is not a formality. The profile decides how your colours are turned into ink — and a file prepared for a different profile can print darker, muddier or with a colour shift compared to what you saw on screen.
What is FOGRA39?
FOGRA39 is a set of measurement data from Fogra, the German research institute for media technology. It describes how colour looks when printed offset on coated paper (paper types 1 and 2 in ISO 12647-2:2004) — the smooth paper used for brochures, catalogues and magazines.
ICC profiles built from that data are what your layout software and conversion tools actually use:
- Coated FOGRA39 (ISO 12647-2:2004) — the profile that ships with Adobe's applications.
- ISO Coated v2 (ECI) — built from the same data by the European Color Initiative.
Both are "FOGRA39". Their separations differ slightly because two different publishers built them, but both target the same printed result. Unless your printer names a specific file, either one is fine.
Why the profile matters
A screen shows colour with light (RGB). A press lays four inks on top of each other (CMYK). To turn an RGB colour into CMYK, something has to decide how much cyan, magenta, yellow and black it takes to hit that colour on that paper on that press. That is the profile's job.
The profile also sets the total ink limit. The coated FOGRA39 profiles allow up to 330 % (the sum of C+M+Y+K in the darkest point). Put more ink down and it dries badly and can transfer onto the sheet above it.
In a PDF/X file the profile is stored as the output intent: a label telling the printer which printing condition the file was prepared for. If it says FOGRA39, the printer knows at once that the file suits their coated offset production.
FOGRA39 and the other profiles
| Profile | Used for |
| FOGRA39 / ISO Coated v2 | Offset on coated paper. The default choice across most of Europe. |
| ISO Coated v2 300 % (ECI) | Same data as FOGRA39, capped at 300 % ink. For presses and papers where the printer wants less ink down. |
| FOGRA29 (Uncoated) | Offset on uncoated paper — letterheads, notepads, book papers. |
| FOGRA28 (Web Coated) | Heatset web offset, such as high-volume magazines. |
| FOGRA51 (PSO Coated v3) | The successor to FOGRA39, based on ISO 12647-2:2013 and measured to account for optical brighteners in modern paper. Some printers have moved to it — use it only if yours asks. |
| GRACoL / SWOP | US standards. Only relevant if you print in the United States. |
If in doubt, FOGRA39 is the safe choice for coated paper. For uncoated paper, ask your printer — colours print softer and darker there, and a coated profile is a poor fit.
How to convert your PDF to FOGRA39
- Open Convert colour profile, upload your PDF and choose FOGRA39 (Coated) — or ISO Coated v2 300 % if your printer wants a lower ink limit.
- If the file must be delivered as PDF/X, run it through PDF/X conversion with FOGRA39 as the output intent, so the profile is recorded in the file where the printer can see it.
- Check ink coverage if the file has large dark areas. The tool shows where the file goes over the limit.
To see what a particular colour becomes in print before you convert, the colour picker shows the CMYK value through Coated FOGRA39 for any point in the document.
Frequently asked questions
Is FOGRA39 the same as ISO Coated v2?
They are built on the same measurement data (FOGRA39) and target the same printing condition. The profile files come from different publishers, so the separations are not identical, but both are correct answers to "FOGRA39".
Why do my colours look duller after converting?
Bright RGB colours — especially neon blue, green and orange — lie outside what four inks on paper can reproduce. The profile moves them to the nearest printable colour. It is not an error; it is how the print would look anyway. Converting yourself means you see it before the printer does.
Can I use FOGRA39 for digital printing?
Many digital printers accept FOGRA39 files and manage colour on their own machines. It is the usual choice when the requirement is simply "CMYK", but ask if your printer has its own profile.
What if my printer asks for FOGRA51?
Then prepare the file for FOGRA51 (PSO Coated v3) in your layout software. The difference is mainly in paper white, and FOGRA39 files still print fine in most places — but follow the printer's spec when it is specific.
Get the file ready now: convert your PDF to FOGRA39, then check the rest of the print requirements with the preflight check.
Photo by Andy Brown on Unsplash.